Connection to the turbine coupling
A range of connectors are available for the DENTO-PREP micro-blaster, allowing connection to the turbine coupling.
All connectors consist of a turbine connection, hose (1.5m) and a quick coupling for connection to the DENTO-PREP.
Attach the quick coupling to the DENTO-PREP.
Remove the turbine handpiece and attach the connector to the turbine quick coupling. Quick and easy!
Here, the hose and the quick coupling from the DENTO-PREP pack are not used.
Connection to the turbine hose
Here, use the four-pin MidWest connector, which is screwed directly into the 4-hole turbine hose.
The MidWest connector is universal and can be used with the majority of treatment units.
Unscrew the handpiece and the turbine quick coupling from the turbine hose connection. Screw the MidWest connector with the threaded side to the turbine hose connection. On the opposite side of the connector, you will find the quick connection with the plugged in air connector. Push the hose of the DENTO-PREP onto the air connector.
